StoPox WG 100 tinted

very good adhesive bond on mineral substrates, water vapour permeable, rapid curing at ambient room temperature, can be filled with quartz sand on-site, low VOC content

Appearance

matt, coloured

Application

as a priming coat: with a rubber squeegee and roller, as filled resin: with a notched trowel and spiked roller

Colour shade

wide colour shade variety, tintable in accordance with the StoColor System, RAL, NCS

Notes

product is in accordance with EN 1504-2 product is in accordance with EN 13813

interior and exposed to the weather, on floors, for cementitious substrates such as concrete or screed surfaces, magnesite and calcium sulphate screeds, as a coloured priming coat and levelling coat under water-based StoPox EP coatings and sealing coats, adhesion promoter onto smooth mineral substrates, adhesion promoter onto existing coatings based on EP/PUR resin (create a test surface)

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

• StoPox WG 100 tinted

• EPD-DBC-20220174-IBF1
• StoPox WG 100 tinted