StoColl FM-E

weather-resistant, frost-proof, diffusion capacity, better adhesive shear capability compared to manually applied pointing mortars, uniform consistency, less flank cracks due to very good connection between joint, stone, and masonry mortar, very good compaction, pointing mortar in accordance with DIN EN 998-2, pointing mortar in accordance with DIN EN 13888 CG2 W

Notes

always order the entire amount required for a project at the same time (this applies particularly to tinted material) always produce the exact same mixing ratio colour shade deviations cannot be excluded the consumption values apply for brick slips with a joint width of 12 mm consumption, colour shade, and appearance depend on the format, bond, and thickness of the brick slips and tiles, and from the mixing ratio, joint width, and joint depth the workability must be tested on a sample surface area

exterior, for injection pointing of ceramic claddings and natural stone tiles, e.g. grained brick slips or blasted natural stone tiles, for use in StoTherm and StoVentec systems with approval for ceramic claddings and natural stone, for walls and facades, for subsequent pointing with the injection method of fair-faced masonry, for narrow brick slips, fair-faced bricks, facade brick slips, cast, stones, fieldstones, etc.

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

• StoColl FM-E

• StoColl FM-E

• EPD-VDP-20230394-IBO1
• EPD-VDP-20230394-IBO1 (EN)