StoPox WB 50

epoxy-resin-bound filler (PC), very high mechanical resistance, very good adhesive strength on a concrete substrate, very good non-sag properties, excellent for filling pores and blow-holes, very good application properties, rapid curing, even at low temperatures ≥ +8° C, water-based, coating in accordance with EN 1504-2

Colour shade

white

on walls in interiors and exteriors of e.g. tunnels, galleries, subways, for filling pores and blow-holes and as a scratch and levelling coat over large areas to protect and repair concrete members, as partial reprofiling of 4–10 mm after addition of approx. 0.5 per cent by weight of StoDivers ST, as partial reprofiling of 10-20 mm after addition of approx. 1.0 weight, percent of StoDivers ST and approx. 20 weight percent of StoQuarz, 0.3-0.8 mm

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

• StoPox WB 50

• EPD-DBC-20220174-IBF1
• StoPox WB 50