Expert tip StoPox WB 50

StoPox WB 50 - our epoxy resin fill for the fastest application
With its new unique formulation, our StoPox WB 50 epoxy resin filler can now be applied even better and faster.

It also cures very quickly even at low temperatures and can be recoated in a short time. This means that tunnel sealing times can be significantly reduced.

Higher area coverage possible
With its new formulation, StoPox WB 50 offers excellent processing properties that make it unique. The thixotropic material enables very good pore and cavity closure with a layer thickness of only 0 to 4 millimetres and can be applied quickly and effortlessly.

This can significantly increase the area coverage.

To the StoPox WB 50 product sheet

There is generally no need to pre-wet the substrate. Post-treatment is also not necessary, which means it can be quickly recoated. Intermediate layer waiting times and lockout times are thus reduced enormously.

It retains its very good processing properties even under difficult conditions such as draughts or high humidity.

Another plus:
StoPox WB 50 can be used on load bearing capacities of existing epoxy resin coatings. These do not have to be laboriously removed.

StoPox WB 50 - tough, but good for the nose
The levelling coat is resistant to temperature changes, mechanically highly resistant and resistant to sulphate-containing water.

StoPox WB 50 is a water-based and therefore low-odour epoxy resin fill. Tools can simply be cleaned with water.

To the product detail page StoPox WB 50

▪ Epoxy resin-bonded levelling coat (PC)
▪ Very high mechanical resistance
▪ Very good bond strength on concrete substrates
▪ High non-sag properties
▪ Very good pore and cavity closure
▪ Very good application
▪ Fast curing even at low temperatures ≥ 8 °C
▪ Coverage per mm layer thickness: 1.5 kg/m²
▪ Water-based
▪ Coating in accordance with EN 1504 parts 2 and 3

To the StoPox WB 50 technical data sheet

StoPox WB 50 in a system with StoPox TU 100 tunnel coating
▪ Application System structure
▪ On interior and exterior walls, e.g. in tunnels, galleries or subways
▪ On load bearing capacity epoxy resin existing paint coats
▪ For surface scratch and levelling coats
▪ For filling pores and cavities
▪ For the protection and repair of concrete members
▪ For partial reprofiling