StoPhotovoltaics Inlay

photovoltaic module with monocrystalline cells, double-glazing: 2 mm cover glass with an anti-reflection layer and 2 mm back glass, module: four-sided framed in anodised aluminium, plug: MC4 plug connection 4 mm², junction box: decentralised connecting concept (3 pieces), limited combustibility: B-s1, d0 in accordance with EN 13501-1, with 80 mm ventilation airspace, electrical data under standard test conditions (STC): I=1000 W/m², AM 1.5, Tu = 25 °C, nominal power: 305 Wp, [+-] 3 %, voltage at maximum power point (MPP): 34.2 V, current at maximum power point (MPP): 8.92 A, open-circuit voltage: 40.62 V, short-circuit current: 9.44 A, open-circuit voltage at -10 °C: 45.2 V, maximum system voltage: 1000 V, reverse current load capacity: max 15 A, maximum approved module temperatures: -40 °C to +85 °C, temperature coefficient of the open-circuit voltage: -0.32 %/°C, temperature coefficient of the module power: -0.42 %/°C, temperature coefficient of the short-circuit current: 0.05 %/°C

Appearance

high-quality and homogeneous, standard colour shade of the cell connector: black, on request: silver, colour-matched frame and mounting rail, slight differences in colour shade nuances of the cells cannot be ruled out due to the production process and can lead to different reflections depending on the incidence of light

Format

standard format: 994 x 1668 mm, installation: horizontal or vertical, module thickness including frame: 40 mm (+/- 2 mm), weight: approx. 13 kg/m²

Notes

type of application: ventilated exterior wall cladding in accordance with DIN 18516-1. installation with approved fixings in accordance with the structural analysis modules require grounding on the DC negative pole avoid strong cast shadows, e.g. disconnect the photovoltaic system from the mains during scaffolding for safety reasons and to facilitate maintenance work; close the DC disconnector between the photovoltaic system and the inverter disposal: defect or discarded modules can be returned free of charge

exterior, for generating energy via photovoltaics on facades, for installation in support rails StoVentro Profile Inlay

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.