Sto-Recessed Anchor Plate

additional plate for the Sto-Thermo Anchor II UEZ 8/60, for a homogeneous and smooth surface, no additional setting tool required

Application

suitable for use with mineral wool insulation boards that correspond to the standard T5 - DS (T+) - WL (P) and fulfil the following criteria: compressive strength or compression stress at 10 % compression - 4.0 kPa in accordance with EN 826. Tensile strength · 3.5 kPa in accordance with EN 1607 Euroclass A1 or A2-s1, d-0 in accordance with EN 13501-1, suitable for use in combination with the Sto-Resol Insulation Board according to the approval Z-33.4-1526

Colour shade

yellow

Notes

minimum insulant thickness ≥ 80 mm, maximum insulant thickness ≤ 300 mm anchor plate diameter 110 mm not compatible with the Sto-Thermo Anchor II-F 8/60

exterior, for countersunk installation of the Sto-Thermo Anchor II UEZ 8/60

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

• EPD-EJO-20210060-IBD1