StoPox WG 100

very good adhesive bond on mineral substrates, very good adhesion promoter on existing coatings, water vapour permeable, rapid curing at ambient room temperature, can be filled with quartz sand on-site, low VOC content, in accordance with the criteria of the Committee for Health-related Evaluation of Building Products (Germany)

Appearance

milky, slightly cloudy

Application

as a priming coat: with a rubber squeegee and roller, as filled resin: with a notched trowel and spiked roller

Notes

product is in accordance with EN 1504-2 product is in accordance with EN 13813

interior and exposed to the weather, on floors, for cementitious substrates such as concrete or screed surfaces, magnesite and calcium sulphate screeds, as a priming coat underneath water-based StoPox products, adhesion promoter onto smooth mineral substrates, adhesion promoter onto existing coatings based on EP/PUR resin (create a test surface), as a wearing course for the StoFloor Traffic WL 100 system for traffic areas

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

• StoPox WG 100

• EPD-DBC-20220174-IBF1
• StoPox WG 100