Sto-Plinth Profile PH

made of plastic, with integrated glass fibre mesh, with drip edge, with pre-assembled plug connections

Colour shade

white

Format

drip edge: 3, 6, 10 mm, length: 240 cm, projection: 76 mm, projection can be reduced to 36 mm and 56 mm using the breaking edge

Notes

when installing an EWIS without plinth insulation, a lower edge can be formed by inserting the Sto-Plinth Profile PH (between the Sto-Starter Profile PH-K and the lower insulation boards) the following combinations are recommended, depending on the insulant thickness: up to 90 mm: Sto-Starter Profile PH-K 50 mm + Sto-Plinth Profile PH up to 150 mm: Sto-Starter Profile PH-K 100 mm + Sto-Plinth Profile PH up to 200 mm: Sto-Starter Profile PH-K (or PH-AL) 160 mm + Sto-Plinth Profile PH

exterior, for plinth formation free from thermal bridges, particularly suitable for low-energy and passive houses, edge protection in the plinth recess area, for the formation of a lower connection on external wall insulation, systems without plinth insulation (in combination with Sto-Starter, Profile PH-K or the Sto-Starter Profile PH-AL), for facade insulation with a thickness of more than 40 mm, max. plinth recess: 60 mm (for buildings with plinth insulation)

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

The specific technical specifications and information on the products contained in the Technical Data Sheets and system desrciptions/approvals must be observed. To obtain the relevant documentation, please contact your local representative or send an e-mail to stocretec@sto.com.

• EPD Sto-Profile mit Gewebe
• EPD-Kiwa-EE-195194-EN